Radiant HL2-DS Series Скачать руководство пользователя страница 40

Страница: 40 / 40

HL2-DS

Series

7.0

Parts

•

Kit Contents Check List

Chart 7.2

•

Kit Contents for HL2-DS Series

TP-33B

1/2” Shut-Off Valve

(Ball Valve & Inlet Tap)

Kit Contents Check List

21400 Hoover Road • Warren, MI 48089

Phone: (586) 756-0950 Fax: (586) 756-2626

www.detroitradiant.com • [email protected]

Printed in U. S. A.

HL2-DS Series Kit Contents

Part No.

Description

Quantity

TP-33B

1/2” Shut-Off Valve and Inlet Tap

TP-83

1/2” x 24” 304 Stainless Steel Flexible Gas Connector

TP-885

Hanging Bracket

HL2DS-ASSY

#10 x 1/2” Screw (5), #8 x 1/2” S.S. Self-Tapping Screw (4), 3/8-16 x 3/8” Bolt,

Flat Washer, End Panel Bracket (2)

HL2DS-HANG*

3/8-16 x 3/8” Bolt (6), Flat Washer (6), Split Washer (6), Stainless Steel Bolts

(4), Stainless Steel Keps Nuts (4), Stainless Steel S-Hooks (12), Zinc-Plated

Turnbuckle (4), #2 Stainless Steel Bulldog Chain (6)

Filled By:

TP-83

1/2” x 24” 304 Stainless Steel

Flexible Gas Connector

HL2DS-ASSY

Assembly Kit

TP-885

Hanging Bracket (x2)

HL2DS-HANG*

Hanging Kit

LIOHL2DS

HL2-DS

Series

Installation,

Operation,

and

Maintenance

Manual

WARNING

Improper installation, adjustment, alteration, service, or maintenance can cause

property damage, injury, or death. Read the installation, operation, and maintenance

instructions thoroughly before installing or servicing this equipment.
This heater must be installed and serviced by trained gas installation and service

personnel only. Failure to comply could result in personal injury, asphyxiation, death,

fire, or property damage.

In locations used for the storage of combustible materials, signs must be posted to

specify the maximum permissible stacking height to maintain the required

clearances from the heater to the combustibles. Signs must either be posted

adjacent to the heater thermostats or, in the absence of such thermostats, in a

conspicuous location.

Not for residential use!

Do not use this heater in the home, sleeping quarters,

attached garages, etc.

Installation of a commercial tube heater system in

residential indoor spaces may result in property damage, serious injury,

asphyxiation, or death.

The HL2-DS Series Infrared Tube Heater is a positive pressure, two-stage radiant heater system. This

manual provides specific information related to the HL2-DS series models. All persons involved with

the installation, operation, and maintenance of the heater system must read and understand the

information in this manual.

For Your Safety

If you smell gas:

• Do not try to light any appliance.

• Immediately call your gas supplier from a neighbor’s phone.

• Do not touch any electrical switch.

• Follow the gas supplier’s instructions.

• Do not use any phone in your building. • If you cannot reach your gas supplier, call the fire department.

LIOHL2DS-Rev. 12917

Print: 1X-08/17 (DRPC)

HL2-DS Series

Manual

Detroit Radiant Products Company

INSTALLER: Present this manual to the end user.

Keep these instructions in a clean and dry place for future reference.

Model#:

______________________

Serial #:

_____________________________

(located on rating label)

Limited Warranty

• 3 year - Burner box components

• 5 years - Combustion and radiant tubes

• 10 years - Stainless steel burner

• See page 38 for terms and conditions.

Approvals

• CSA

• Outdoor Approval

* HL2DS-HANG Kit is not included when optional hanging bracket kit (P/N: DS-BKT20 or DS-BKT33) is ordered.

Содержание HL2-DS Series









































Результаты поиска

Содержание HL2-DS Series

Отзывы:

Бренды по названию

Популярные бренды

Radiant HL2-DS Series, Руководство по установке

Результаты поиска

Содержание HL2-DS Series

Отзывы:

Бренды по названию

Популярные бренды