![background image](http://html2.mh-extra.com/html/radialight/klima-series/klima-series_operating-instructions-manual_3227246016.webp)
31
6.3.2 Open window sensor
This function makes it possible to detect an open window and automatically activate the Anti-freeze operating mode.
If a sudden reduction is temperature is detected when the radiator is operating normally, anti-freeze mode is activated
automatically to reduce energy wastage. On the display the window and anti-freeze symbols flash together, while the
symbol for the operating mode set by the user stays on.
Reinstating normal operation does not occur automatically, but must be activated by pushing the "M" key.
Important:
Correct operation of this function may depend on where the radiator is positioned in the room, the presence of draughts, the
outside temperature, and how long the window stays open.
6.3.3 Remote control
This function allows the radiator to be controlled using external timers, piloted sockets with telephonic control, and similar
devices. When the function is active, if the radiator's power supply is reinstated after being interrupted for more than 30
minutes, when it is switched on Stand-by mode is not set as normally happens, by Comfort mode starts immediately. The
comfort temperature is as set before the power supply was interrupted. The (optional) presence sensor and open window
sensor are deactivated. This means that the radiator can be switched on without being in the room.
6.4 Utilities
Lock controls
The radiator's controls can be locked to
prevent
settings
being
changed
accidentally, or by unauthorised people.
To go to lock/unlock mode, hold the "F"
key down.
Once the display reads "LOC":
Hold the "F" key down and push the "+"
key to lock the controls.
Activation is indicated by the relevant
icon that switches on, on the display
Hold the "F" key down and push the "-"
key to unlock the controls.
When this function is activated, in case the supply voltage returns after an interruption exceeding 30min,
the operating mode set at the time of the interruption is recovered. If the operating mode was one of the
three programs P1, P2 or P3 the frost free program is activated instead, because it is necessary to set the
time and the day of the week before activating again a program.
Содержание KLIMA Series
Страница 3: ...3 6 8 7 click 5 click A B...
Страница 4: ...4 9 3m 1m 4m 3m...