Version 1.0 - August 2022
9
User manual SDM Battery Series
5.7. Set torque and enable/disable RF
After screen is unlocked with a valid password, Pressing “
RIGHT
” key will allow you to set torque and / or
angle. See section
3. Setting Torque and / or Angle
for more information.
This below screen allows the user to enable or disable the radio module. The selection on the left disables
the radio module and the selection on the right enables the radio module.
5.8. Gang count
The below screen shows the gang count number of bolts to be fastened per Group, Gang, or Set for
Configuration 1. This can be modified by entering edit mode.
5.9. Shiftdown speed
This screen indicates shiftdown speed of the SDM Battery tool. Shiftdown speed can be edited by
entering edit mode and updating using "
UP
" and "
DOWN
" key.
