Version 1.0 - August 2022
13
User manual SDM Battery Series
5.19. Warning screen
This is the next screen obtained after pressing “
UP
” key when SDM Battery tool displays the Password
screen.
5.20. Shunt Calibration, RF Signal Strength and Battery level
This is the next screen obtained after pressing “
UP
” key when the tool displays password screen.
Indicates Shunt Calibration Value.
5.21. Cycle count
This value shows number of cycles run by the tool, Since the last time it was changed.
With the tool unlocked, press ‘
ENTER
” key to edit this screen. Press either the ‘
UP
’ or ‘
DOWN
’ key to
clear the cycle count. For this change to be retained a cycle must be run before removing power to the
tool. Otherwise, the old cycle count is restored.
