25
EN
◆
SENSOR
The closing time is controlled by a light sensor in
relation to the level of brightness.
In addition, the measured twilight value is linked to the
previously configured closing time.
In doing so, the previously configured time is interpreted as
"latest at xx:xx hours".
Example:
If, for example, 20:00 hours is configured as the closing time,
then the roller shutter would close at approximately 17:00
hours during the winter months (due to the shorter days).
however, during the summer months, the roller shutter
would close at 20:00 hours at the latest, due to the longer
days.
17. Opening and closing times [ ]
Configuring opening and closing times with active weekly
program.
If the
weekly program
is active (see page 40), then an opening
and closing time can be configured for each day. The display
indicates the respective day of the week in this case, instead of
"Mo - Su" (MO.....SO)
.
Timer mode only configurable for Monday [Mo].
a
closing time
mode setting
(Down)
can only be selected for
monday (NORmaL, aSTRO, SeNSOR).
This closing time mode applies to the entire week.
This means that it is then not possible to change the closing
time mode for the closing times between Tuesday
(DI)
and
Sunday
(SO)
.
Содержание SpeedTimer 3650 05 12
Страница 15: ...15 PE N L1 PE N MOTOR 1 N N N L1 i EN 12 Electrical connection of the SpeedTimer ...
Страница 63: ...63 i EN ...