RADEMACHER RolloPort S2, Перевод оригинального руководства по эксплуатации и сборке

Страница: 12 / 36

Important installation instructions
Before installation check...:
◆
...whether your door operator is suitable for the type
of garage door and the garage door height.
◆
...that the door is in a perfect mechanical state. The
door must be smooth running and be balanced.
Check whether it opens and closes properly;
Open the door approx. 1 metre and let go. A
balanced door should now remain in this position.
If not, have your door adjusted by a specialist
company.
◆
The door operation must not be hindered by in-
correctly adjusted springs or by incorrectly func-
tioning door suspensions or door constructions.
Before installing the drive...,
◆
....remove all unnecessary ropes or chains and disable
any equipment, such as locks, not needed for powered
operation.
STOP
During installation there is a danger of injury
due to the unsecured door falling suddenly.
◆
During the installation work, ensure that there are
no persons in the swivelling area of the garage door.
Important instructions for a safe installation.
Follow all installation instructions carefully.
An incorrect installation can lead to serious
injuries.
Faulty installation can result in serious ac-
cidents and injuries.
◆
Fit the actuator for the emergency release at a height
of less than 1.8 metres.
◆
Use only the enclosed mounting materials and only
original spare parts and original accessories.
◆
Any existing door locking devices already fitted to
the door may hinder the correct functioning of the
door and must therefore be removed.
◆
Movable parts of the garage door must not extend
into public footpaths or cycle paths.
◆
Poor lighting hinders the installation work and can
result in injuries. Ensure that there is adequate
lighting during installation work.
◆
It is possible that during the installation work, you
may not be able to open the door for a short period
of time.
◆
This drive is not to be used with doors having openings
exceeding 50 mm in diameter or having edges or
protruding parts a person could grip or stand on.
◆
Permanently fix the label concerning the manual release
adjacent to its actuating member.
◆
Attach all labels so that they are clearly legible.
◆
The manufacturer is not liable for damage which
occurs due to incorrect or non-compliant use (see
warranty conditions).
12
EN