RADEMACHER RolloPort S2, Перевод оригинального руководства по эксплуатации и сборке

Страница: 19 / 36

WRONG
The screw does not
have sufficient hold
Fixing hole made
by drilling
RIGHT
The screw has
sufficient hold
Fixing hole made
using spike
(C) Installation of the door bracket (8)
NOTE
We recommend fixing the door bracket
(8)
to the door
frame if possible.
For plastic or thin-walled wooden doors, additional cross-
beams are necessary in order to avoid damaging the door.
In this case, consult your door supplier.
Use existing drillholes, if possible, to mount the door
bracket (8) .
Key
8
= Door bracket
9 = Bolt (8 x 20 mm)
10 = Self-tapping hexagon screw (6 x 15 mm)
11
= Securing bolt (2 x 20 mm)
12 = Door connector, bent
8
10
11
9
12
Place the door bracket (8) on the top edge
of the garage door and align it with the centre
of the door (in a line with the profile slide).
Next, mark out the four fixing holes on the
door frame.
2.
1.
Punch in the fixing holes in the door frame
with the aid of the enclosed spike
NOTE
Self-tapping screws need sufficient hold in the mate-
rial. Check the thickness of your door frame. If it is
sufficiently thick you can also pre-drill the fixing holes
with a 4 mm metal drill bit if you are not able to punch
in the holes with the spike.
19
EN