rada A-TC04 NoirCam, Руководство пользователя

Страница: 16 / 42

3.
Remote Control Functions
IR Remote Control Keys and Commands
6. Zoom Control Keys
Zoom
＋
: Zooms in the lens, making the image appear closer.
Zoom
－
: Zooms out the lens, making the image appear farther.
7. “SET PRESET” and “CLEAR PRESET” Keys:
SET PRESET: Press this button and then a 0-9 number key to save the current
pan/tilt/zoom settings as that preset number position.
CLEAR PRESET: Press this button and then a 0-9 number key to clear that preset
number position.
1. Standby Key
Press and hold for 3 seconds to send the camera into standby mode.
Press and hold for 3 seconds again to boot up the camera. It will
perform the self-test and return to the “HOME” position or to Preset 0
if it is configured).
2. Camera Address Selection
Change the remote’s IR number to control the camera with the same
IR number. Please note that NoirCam is set to “1” by default.
3. Number Keys
Press to move the camera to presets 0-9. You will need to save them
first by following the procedure described under the point 7. “SET
PRESET” and “CLEAR PRESET” keys.
4. Asterisk (*) and Hash (#) Keys
These keys are used in some of the commands described bellow.
5. Focus Control Keys
AUTO: Enables autofocus on the camera.
MANUAL: Changes the focus mode to manual, allowing you to
change it with the plus (+) and minus (-) buttons.
1
2
3
4
5 6
7
8
9
10
15