© 2011 Racktivity NV
33/55
Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com
v 2013.10.7
Overheat Protection
o
path: Settings > Overheat Protection
Depending on the parameter one or more of the following types of thresholds will be available:
Warning
: The outlet state is not changed, only an SNMP notification is sent
Switch Off
: The designated outlet is toggled off and an SNMP notification is sent
Low
:
When the measurement goes below this value an SNMP notification is sent
High
:
When the measurement goes above this value an SNMP notification is sent
To change a threshold enter the desired value into the appropriate input area and press the Save
button. If the background of the input area turns red an incorrect value has been entered.
Note:
Most thresholds have corresponding SNMP checkboxes that enable/disable the
notification. Please ensure both the threshold
and
the appropriate SNMP notifications
are set correctly.
