© 2011 Racktivity NV
20/55
Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com
v 2013.10.7
Network Settings
There are two methods for setting up the IP address: Dynamic IP address assignment and Manual
Assignment. If you are uncertain which method to use, contact your network administrator for
assistance before continuing the installation process.
Note:
As of firmware version v1.2 the EnergySwitch has secure HTTP (
HTTPS
) enabled by default.
Use ‘https://’ instead of ‘http://’ in your browser to access the web portal.
Firmware version 1.2 or higher
Dynamic IP Address Assignment (DEFAULT)
1.
Press the
MENU
button until the
MAIN
menu appears, select
Network Settings
using the
DOWN
button and press
OK
.
2.
Within the
Network Settings
menu, select
DHCP
. When the value at the bottom of the
screen shows
Enabled
, the device already has dynamic IP assignment enabled (skip to step
4). If not, press
OK
and verify that
Enabled
is displayed at the bottom of the screen.
3.
Use the
UP
button to select
Apply Settings
and press
OK.
Press the
MENU
button to cancel
or the
OK
button to apply the settings.
