ComboXCAT-IP User Guide
70
Rackit Technology Corporation – www.rackittechnology.com – 1-800-636-3434
HTTP Port
Port number at which ComboXCAT-IP's HTTP server is listening. If left empty the
default value will be used.
Telnet Port
Port number at which ComboXCAT-IP's Telnet server is listening. If left empty the
default value will be used.
SSH Port
Port number at which ComboXCAT-IP SSH (Secure SHell) server is listening to. If left
empty the default value (port 22) will be used.
Bandwidth Limitation
The maximum network traffic generated through ComboXCAT-IP ethernet device.
Value in Kbit/s.
Enable Telnet Access
This enables the Telnet function.
Enable SSH Access
This enables the SSH (Secure SHell) function.
Disable Setup Protocol
Enable this option to exclude ComboXCAT-IP from the setup protocol. Setup protocol
is a proprietary layer-2 MAC-based protocol to allow some configuration software to
detect ComboXCAT-IP devices in the network, even without IP address, and then
config network related settings to ComboXCAT-IP.
LAN Interface Settings
The "Autodetect" will set the ethernet speed to the fastest possible value supported by
both endpoints of the link. For example, if you use a 10M/half duplex HUB, this speed
will be auto-selected. If this option does not work with some network device (HUB,
switches, and routers), you can set the Ethernet interface speed of ComboXCAT-IP
manually to the values as supported by the network device.