5.5 USING ON SLOPES
When mowing lawns on a slope, observe the maximum gradients already mentioned
(
max 10° - 17%
) and move up and down but never across them. Take great care when
changing direction that the highest wheels do not hit obstacles (such as stones, branches,
roots, etc.) that may cause the machine to slide sideways, tip over or otherwise cause loss
of control.
SLOW DOWN BEFORE CHANGING DIRECTION ON
SLOPES. Never use reverse to reduce speed going downhill: you may lose control
of the machine, particularly on slippery surfaces. Never ride the machine on slopes
in neutral or with the clutch out! Always engage a low gear and the parking brake
before leaving the machine at a stopped and unattended.
Take care when beginning forward movement on sloping
ground to prevent the risk of tipping up. Reduce the forward speed before going on
a slope, particularly downhill.
5.6 TRANSPORTING
If the machine is transported on a truck or trailer, use
ramps with suitable resistance, width and length. Load the machine with the engine
switched off, without a driver and pushed by an adequate number of people. During
transport, close the fuel stopcock (if fitted), lower the cutting deck, engage the
parking brake and fasten the machine securely with ropes or chains to the hauling
device.
26
Содержание RAC62PR-1-UK
Страница 36: ...36...