Racing RAC62PR-1-UK, Оригинальное руководство пользователя

Страница: 33 / 40

4.
The engine does not start
– earth connections of the micros witches –check connections
disconnected
– you are not ready for starting –check that the conditions
allowing the start are met
( ☛ 5.2.a)
5.
The engine stops –earth connections of the micro switches –check connections
Disconnected
6.
Starting is difficult or the –fault in carburetion –clean or replace the air filter engine
runs erratically –flush out the float chamber
–empty fuel tank and refill with fresh fuel
–check and, if necessary, replace fuel filter
7
.
Weak engine performance –forward speed too high in relation to –reduce the forward speed and/or raise
during cutting cutting height the cutting deck ( ☛ 5.4.5)
8
.
Engine stops when blade is engaged –you are not ready to engage the blade –check that the safety
requirements are met(5.2.b)
9
.
Unusual vibrations while working –blade unbalanced –Contact your dealer
–blade loose –Contact your dealer
–fixing bolts loose –check and tighten all the fixing bolts
of the engine and frame
10
.
Uncertain or ineffective braking –the brake is not adjusted correctly –Contact your Dealer
11
.
Uncertain or ineffective braking –the brake is not adjusted correctly –Contact your Dealer
Do not take on complicated repair work if you don't
have the necessary equipment or the technical
knowledge. The warranty is
automatically voided and the manufacturer is not held responsible if
repairs are done badly.
33