Racing RAC62PR-1-UK, Оригинальное руководство пользователя

Страница: 21 / 40

5.4.2 Starting and moving without mowing
this machine has not been approved for use on public
roads. It has to be used (as indicated by the Highway Code) in private areas closed
to traffic.
When moving the machine, the blade must be disengaged
and the cutting deck put at its highest position.
To start the forward movement:
1. put the accelerator control between the «SLOW» and «FAST» positions;
2.push the pedal right down (
☛
4.2) and put the gear change lever in 1st gear (
☛
4.4a).
3.release the pedal gradually to begin the movement.
Reach the desired operating speed using the accelerator and gear lever. To change gear,
the clutch must always be used by pushing the pedal (
☛
4.2).
The pedal must be released gradually as sudden
engagement may cause tipping up and loss of control of the vehicle.
Do not suddenly release the pedal and do not start
moving with the gear shift more than 1/3 of the way towards «F» to avoid suddenly
engaging drive which could cause the vehicle to tip and loss of control.
5.4.3 Braking
To brake:
1. first slow down the machine by reducing the engine speed;
2. push the pedal right down (
☛
4.2) to lower the speed even more until the
machine stops.
3. Move the speed gear shift (
☛
4.4) to idle «N» to permit gradual motion.
5.4.4 Retromarcia
Reverse MUST be engaged only when the machine has
stopped
1.When the machine has stopped, put it in reverse by moving the lever sideways to
position «R» (
☛
4.4);
2.gradually release the pedal to engage the clutch and then begin moving in reverse.
21