Racepak
Racepak
Racepak
Racepak
949-709-5555
www.Racepak.com
Naming and Storing the Uploaded Data
After the data has been uploaded from the memory card, a dialog box will be displayed to allow you to enter the
session information. Enter the appropriate year and track by selecting the correct value from the selection lists.
If the desired year and/or track is not on the corresponding selection list, enter the new year or track, by typing
the name directly into the top selection box. The new year, and/or track will be added to the selection list.
Select the race type, and race sequence information by clicking on the desired radio button. The system will
enter the date and time.
This information will be used to name the data file. The dialog box is shown below. If you need help on filling
out the dialog box, click on the help icon in the upper left hand corner of the dialog box.
Select
OK
or
Next
depending on your configuration file. Additional dialog boxes may be displayed. These are
part of the Run Log sections that are user programmable to allow test information to be entered during the
download process. Fill out the information appropriately. The file save dialog box will then be displayed as
shown below.
To save and view the file, select the
Save
button. To view the file only, select the
Cancel
button. If you select
cancel you can save the file later if desired. A new file tab with the channel data will be opened. You are now
ready to view the data.
Refer to the DataLink II instruction manual for information on viewing the run data.
27
O
p
er
a
tin
g
t
h
e
S
p
o
rt
sm
a
n
