Racelogic Ltd
Quick Start Guide
02/05/2014
Page 8
Connections
Mounting PerformanceBox in your car
1. Connect the cigar lighter adaptor power cable to the power socket on the back of your
PerformanceBox.
2. Slide PerformanceBox into the windscreen mounting bracket.
3. Using the suction cups of the windscreen mounting bracket, fix the PerformanceBox
assembly to a suitable place low down in the centre of your windscreen.
4. PerformanceBox has an internal GPS antenna, so try to mount PerformanceBox where it
will have the largest possible view of the sky.
5. Park your vehicle outside in an open area away from obstacles such as tall buildings and
trees.
6. Insert the PerformanceBox power cable into the vehicle cigar lighter socket. If power is not
permanently available at this socket, turn on the ignition to ensure power at the socket.
7. The first time PerformanceBox is used it will need to be left for 10-15 minutes to acquire
fully the latest satellite constellation information.
8. After this initial period, PerformanceBox will then only take 1-2 minutes to lock onto
satellites when you use it next time.
9. Wait for the satellite image to disappear which means lock has been obtained.
Registering your PerformanceBox and activating all available functions.
To get full PerformanceBox functionality including data logging, lap timing and performance mode,
you need to register your PerformanceBox at the PerformanceBox website.
Registering Your PerformanceBox
Log onto the PerformanceBox website
www.PerformanceBox.co.uk
then go into Product
Registration where you will be asked to input information including the serial number of the unit.
