Save Settings to SD
To save the settings to an inserted SD card, select the '
Save Settings to SD
' button and enter a suitable file name using
the presented keyboard. To save the name, press the
Confirm
button in the bottom right corner. Press the
Cancel
button in the bottom left corner to return to the Settings screen without saving.
Note: If you press the
Save Settings to SD
and the device cannot detect an SD card, it will display 'NO SD CARD' in
the screen header, all 4 LEDs at the top of the unit will flash
red
twice, and an audible error tone is emitted if the 'Save
Settings to SD' button is pressed.
Save Settings Keypad Example
When the file is saved successfully, the screen will present a file saved notification, the LEDs will flash
green
and the
unit will emit an audible confirmation notification. If a settings file with the same name already exists on the SD card, the
unit will advise that the file is being overwritten. A "cancel timeout screen" will display, allowing you to cancel the
overwriting process within 5 seconds. If cancelled, the LEDs will briefly flash
red
and the unit will emit an audible tone,
notifying you that the overwriting has been cancelled.
https://en.racelogic.support//Product_Info/Displays/MFD_Touch/MFD_Touch_User_Guide/05_-_MFD_Touch_Settings
129
