User Manual 1260-60A/B
Installation Instructions 2-1
Chapter 2
INSTALLATION INSTRUCTION
Unpacking and
Inspection
1.
Before unpacking the switching module, check the exterior
of the shipping carton for any signs of damage. All
irregularities should be noted on the shipping bill.
2.
Remove the instrument from its carton, preserving the
factory packaging as much as possible.
3.
Inspect the switching module for any defect or damage.
Notify the carrier immediately if any damage is apparent.
4.
Have a qualified person check the instrument for safety
before use.
Reshipment
Instructions
1.
Use the original packing if it is necessary to return the
switching module to Racal Instruments for calibration or
servicing. The original shipping carton and the
instrument's plastic foam will provide the necessary
support for safe reshipment.
2.
If the original packing is unavailable, wrap the switching
module in plastic sheeting and use plastic spray foam to
surround and protect the instrument.
3.
Reship in either the original or a new, sturdy shipping
carton.
Option 01
Installation
Installation of the Option 01 into the 1260-60A,B is described in
the Installation section of the 1260-Series VXI Switching Cards
Manual.
Module
Installation
Installation of the 1260-60A,B Switching Module into a VXI
mainframe, including the setting of DIP switches, is described in
the Installation section of the 1260 Series VXI Switching Cards
Manual. The ID byte DIP switches should be set as follows:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com