background image

TIPS FOR EXTENDING THE LIFE OF YOUR 
PRESSURE WASHER

Never operate the unit without water. 

1. 

This pressure washer is not designed to pump 

2. 

hot water. Never connect it to the hot water 

supply – this will significantly reduce the life of 

the pump. 

Only use detergents specifically designed for 

3. 

pressure washers. Other types of detergent 
may cause internal damage to the unit, as 
might chemicals such as bleach, washing-up 
liquid, etc.

 

Do not use the unit unless it is attached to a 

4. 

suitable water supply. 

Winter Storage:

 

5. 

For storage during the winter months we 

recommend the use of a solution of 50/50 mix 

of antifreeze and water. This will keep the pump 
from freezing and getting damaged and will 
protect the internal components.

Method: You will need a length of garden hose and 

a funnel. Attach the garden hose to the inlet and 
pour the antifreeze into the unit via the funnel.

Switch the unit on for a few seconds to allow the 
solution to flow through the system. Disconnect 
your pressure washer from the mains power, then 

pack away in your storage area.

WARNING:

 Before reusing, completely flush the 

unit out with plain water.

Anti-freeze can damage paintwork so you must 
ensure there is no anti-freeze left in the system 

before using it again.

-9-

Содержание RAC-HP009














Отзывы: