05/2003
1
6
1
5
8
8.1
2
3
1
1
10
Working position
Open the shut-off valves at the hose ends.
The folding halves are hydraulically locked in
the folded-in position and can be unlocked with
the application of pressure to the “unfold” function.
Completely extend the cylinder (horizontal position
on the piston rod tie rod
8/2
can be corrected).
Switch the pin
(5/1)
to the desired working depth.
Only fold in and out when engaged!
Fix the rollers in position prior to folding in!
Unplug in flat working position (5/1).
Attention! Switch off the power take-off!
Set down the rotary harrow
Only set down while folded out - on support
(8/1)
and rollers (pins
5/1
in the same position in all hole
strips).
Ensure a firm standing.
Position the articulated shaft in the bracket
(8/3)
.
Close the shut-off valves at the hose ends.
Protect hydraulic coupling plug against dirt.
Transport position
Power take-off switched off! Lift the implement and
secure the packer rollers in the bottom position -
with plugs in the outside of the hole strip
(5/1)
.
After folding the implement in, the folding cylinders
lock automatically.
Make sure that there is sufficient clearance with
the tail lights set up.
Close the shut-off valves at the hose ends
(8.1/1)
.
Secure the tractor control unit.
Fix the lower link at the side.
Ensure sufficient ground clearance and take into
account the transport height.
Mount the lighting unit with warning sign
(
6/1
= additional equipment).
Observe the transport information on page 12!
Subject to technical modifications
