RAB EZPAN HE 1X4, Инструкции

Страница: 2 / 3

INSTRUCTIONS
EZPAN® HE INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
0-10V DIMMABLE WIRING
Universal voltage driver permits operation at 120V thru 277V, 50 or
60 Hz. For 0-10V Dimming, follow the wiring directions as shown
(Fig. 5) .
1. Connect the black fi xture lead to the LINE supply lead.
2. Connect the white fi xture lead to the COMMON supply lead.
3. Connect the GROUND wire from fi xture to supply GROUND .
4. Connect the purple fi xture lead to the (V+) DIM lead.
5. Connect the pink
(or gray) fi xture lead to the (V-) DIM lead.
NOTE: Do not connect DIM V+ (purple)/ DIM V- (pink/gray) to line
voltage
Fig: 5
PINK (or GRAY)
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE BLACK
WHITE
PURPLE CLEANING & MAINTENANCE
CAUTION: Be sure fi xture temperature is cool enough to
touch. Do not clean or maintain while fi xture is energized.
TROUBLESHOOTING
1. Check that the line voltage at the fi xture is correct.
Refer to wiring directions.
2. Be sure the fi xture is grounded properly.
1. Clean polycarbonate lens with non-abrasive cleaning solution.
2. Do not open the fi xture to clean the LEDs. Do not touch the LEDs.
SAFETY INSTRUCTIONS
WARNING:
Risk of fi re or electric shock. Suitable for damp locations.
WARNING: Suitable for 9/16” or 15/16” Flat Tee Grid in both
insulated ceilings and non-insulated ceilings.
Access above ceiling required.
WARNING: Do not handle energized fi xture when hands are wet,
when standing on wet or damp surfaces, or in water.
WARNING:
Vapor barrier must be suitable for 90°C.
WARNING: Fixture to be independently supported to
building structure.
Note: These instructions do not cover all details or variations in equipment nor
do they provide for every possible situation during installation, operation or
maintenance.