K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
7 of 9
R-Style Flip Table #54061
Step 9
Step 10
• Place the worksurface on a
protected surface with the pilot
holes facing up.
• Unlock the retainers on the
base and close the mechanism
assemblies by pulling out on the
connector tube, and rotating
the assemblies until they lock
into place.
• Set the base on top of
the worksurface.
• Place the assembled base onto
the worksurface.
• Align the holes in the mechanisms
with the pilot holes on the
worksurface.
• Attach with four wood screws into
the outside corners of each. Do not
over-tighten.
A
D
H
H
