K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
4 of 9
R-Style Flip Table #54061
T
F
Step 3
• Lay the beam on a protective surface with the
insert channels facing up.
• Place one of the leg assemblies over the main
beams sliding the insert into the hollow leg
assembly. The leg assemblies are interchangeable.
• Insert the screws into the leg and fully tighten.
Do this to both legs.
Step 4
• Set the main beam and leg assembly upright.
• Peel the backing off two front bumpers and attach
them to the main beam. Locate them about 6-1/4”
from the ends of the beam and on center.
N
T
F
K
U
N
T
U
N
