K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
9 of 9
R-Style Flip Table #54061
Step 13
• Place a spacer between the latch on each
mechanism and the underside of the worksurface.
Place the spacer tight to the forward end of the slot.
• Attach with wood screws. Tighten so the latch can
still slide in and out.
A
C
H
R
H
R
Operation
• To flip the worksurface to a vertical position, pull out on the
connector bar, and rotate the worksurface upward.
• Place the retainers into the slots on the body of the mechanisms
to secure it.
Securing the worksurface with the retainers in
the vertical potion is critical for safety reasons.
• To place the worksurface in the horizontal position, pull the
retainers out of the slots and rotate the worksurface downward
until the mechanisms lock into place.
