K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
8 of 9
R-Style Flip Table #54061
Step 11
Step 12
• Place the assembled base on its caster wheels.
• Pull out on the pull bar and flip the table in the
vertical position.
• Place the retainers into the slots to lock it into place.
• Drive one wood screw into the center of each
mechanism, fully tighten.
This step applies to 60” and 72” flip
tables only.
• Place the unit on its casters and open up
the mechanisms by pulling out on the
pull bar.
• Measure the center of the worksurface
(left to right) and align with the center of
the main beam.
• Attach one bumper with a wood screw,
no pilot hole is provided.
H
A
D
H
A
C
G
Q
G
Q
