R82 Quokka, Руководство пользователя, Страница: 29 / 68

7. Gently pull up on the harness straps to
tighten lap section of the harness which
should fit across the child’s upper thighs.
8. Slowly pull the adjuster strap until the
harness is snug around the child (Fig. E).
•
A snug strap should not allow any slack.
It lies in a relatively straight line without
sagging. It does not press on the child’s
flesh or push the child’s body into an
unnatural position.
•
You should not be able to pinch excess
webbing at the shoulder once the
harness is properly secured.
9. Position the harness clip at the middle
of the child’s chest, level with the child’s
armpits (Fig. F).
10. Verify that the harness is not twisted and
the child is properly secured. Fasten the
harness clip (Fig. G).
IMPORTANT: Always pull on the harness
after securing the child to ensure the buckle
tongues are secure in the harness buckle.
Checklist before tightening
the harness:
Check for proper harness
height (see pages 5).
•
Remove slack between
the buckle and the
harness covers.
 
Pull the harness adjuster away
from the child restraint to tighten.
Do not pull sideways.


SECURING YOUR CHILD
27