R82 Quokka, Руководство пользователя, Страница: 28 / 68

SECURING YOUR CHILD
Buckling and Tightening the Harness
1. Loosen the harness by lifting the
harness adjuster release lever located
on the front of the child restraint while
pulling both shoulder straps forward
(Fig. A).
2. Release the harness clip by squeezing
the tabs and sliding the pieces apart
(Fig. B).
3. Unfasten the harness buckle by pressing
the release button and sliding the
tongues out.
4. Move the harness straps to the side of
the child restraint.
•
Use the elastic harness holders located
on both sides of the cover to aid in
holding the straps open.
IMPORTANT: Remove bulky coats and/or
jackets before putting the child in child
restraint. Adjust the harness to fit the
clothes the child is wearing.
5. Place child in the child restraint.
NOTE: The Wedge Positioning System can be
used to improve the fit of the harness at the
child’s upper thighs. See page 10.
6. Position harness straps around the child
and fasten harness buckle (Fig. C) .
•
Proper connection of the harness buckle
is confirmed with an audible click after
inserting each buckle tongue.
•
If the buckle will not fasten with an
audible click after insertion of each
buckle tongue, the harness buckle or
adjuster area may be clogged with food,
drink or other debris that needs to be
removed. See page 28 for cleaning
instructions.
26