R3 EchoRing ER-EB 1000M, Руководство пользователя

Страница: 12 / 15

http://echoring.com
Revision: 1
5 Web-based Configuration Interface
5.1 General Information
The Web-based configuration interface is used for configuring, deploying and reconfiguring
devices.
5.2 Set Up and Access Web User Interface
1. Arrange and connect a PC, the Config Server and the devices, intended to be in the
same network cell, to the network switch according to the following diagram:
Figure 5-I: Config setup
2. Ensure all Ethernet cables are connected, and that all devices are powered on.
3. Open the PC’s network settings and configure the static IP address 10.10.100.99 and
the subnet mask 255.255.0.0.
4. Open a web browser and enter the URL http://10.10.100.100 .
!
ATTENTION — The web-based user interface is designed for the web browsers Firefox (version 60
or newer) and Chrome (64 or newer). Other browsers may not support full functionality.
5.3 Configure the Device
1. Set up and access the Web User Interface (see Section 5.2).
2. In Web User Interface, take a look at ”Echoring Deployment”. Connected devices are
shown in the paring view there. Click the IP address to pair all devices or click each
device to include/exclude it.
5. Web-based Configuration Interface
Page 8 of 11
© by R3 – Reliable Real-time Radio