R3 Bridge E, Руководство пользователя

Страница: 20 / 48

5.2 Basic Configuration
In order to configure a device, it must be set to Configuration Mode before it is booted.
i
NOTE — If the configuration on a device has exactly one network and one subnetwork (i.e. Static Stations)
then the node will start automatically. Otherwise they are Mobile Stations and need to be started using
External Runtime Control Interface (ERCI) commands (see Section 6.2).
The command to enable the
Configuration Mode on future bootups of the Bridge E can be sent by the Configuration Server (see
Section 4.3).
1. To enter the Configuration, click on ”Configure Plant”.
2. Mobile Stations are listed on the left. To add more, click on the ”+”­symbol.
3. The different networks with their associated subnetworks are displayed and can be
configured. The networks can be renamed.
You can choose for each subnetwork on which Channel and with which TxPower the
devices should operate. Static Stations can be added to a subnetwork by clicking on
the ”+”­symbol.
i
NOTE — The maximum number of networks (= configurations) is 20 with no more than 24
subnetworks per network. The maximum number of Channels is 3 for all subnetworks in a network.
5. Using the Device
Page 18 of 45
www.r3.group