R3 Bridge E, Руководство пользователя

Страница: 17 / 48

4.3 Configuration and Deployment
There are two modes a device can operate in depending on whether the device needs to be
configured or go into deployment.
A device can be configured and updated in Configuration Mode. The device loads the
deployed configuration in Deployment Mode.
New devices will be in Configuration Mode. Once a configuration is successfully deployed,
the device will go into Deployment Mode after the next reboot.
Devices can be reset to Configuration Mode using the Configuration Server:
Once that command is sent to the device, it will return to Configuration Mode after the next
reboot.
The device will go into Fallback Mode if an error occurs during deployment or bootup. In
Fallback Mode, the device can be returned to Configuration Mode using the Configuration
Server as described above.
www.r3.group
Page 15 of 45
4. Installation