R3 Bridge E, Руководство пользователя

Страница: 6 / 48

!
ATTENTION — The device is certified with the enclosed antenna. Any other antenna can exceed the
maximum permitted transmission power.
!
ATTENTION — The device must not be disassembled. Do not break the seal!
3.3 Equipment Required
Needed to
ID Item Deploy Operate Update
1 Bridge E x x x
2 Power Cable M12, 5­pin, A­coded x* x* x*
3 Ethernet Cable M12/RJ45 x x x
4 Network Switch x x
5 Ethernet Cable RJ45/RJ45 x x
* Item not needed if Power over Ethernet (PoE) is used.
3.3.1 Requirements for the Equipment
ID Item Requirements
3 Ethernet Cable M12/RJ45 The signal cable for digital input must be routed in the
same cable as the power supply and functional ground if
the line length exceeds 3 meters.
4 Switch Possibility to disable IGMP Snooping; at least as many
ports as Bridge E devices should be con 2
3. Product Information
Page 4 of 45
www.r3.group