Installing operations
The installation of any electrical equipment should be always made
by technical and specifically trained technicians, who are supposed
to be aware of the risks related to the connection to an electrical supply.
Before proceeding to the installation, it is mandatory to verify that the
general electrical supply is fully in compliance with the normative of the
Country where the equipment will operate.
In the rear panel of the equipment, the requested electrical features of
mains are reported.
The utmost attention should be devoted to the grounding
system of the mains: this grants the personal safety of the
technical personnel in case of stray currents due to static voltages
accumulated in the equipment.
Before proceeding to any operations, we strongly recommend to make
sure that an adequate and certified grounding system has been set.
In case of disregard of the above mentioned recommendations, the
manufacturer does not take any responsibilities about damages to
persons and materials.
Once the place where the equipment will be situated, it is important to
verify the compliance with some specific criteria.
Any materials or objects should be placed at a distance of at least 30cms
from the cooling air ducts of the equipment. This will assure the regular
cooling conditions of the heat-sink of the equipment.
