To display the frequency push the SET key.
In order to display the parameter push the SELECT key.
Display Password
The Password mode is factory set to enable, and is not possible change
this SET.
The default password is 1 2 3.
The WAIT of changing the password is as follows:
•
Press for 3 seconds the SELECT key;
•
Press the SELECT key for move the underscore character position at
the required digit, and press the SET key to confirm the digit.
Carry out the same operation for the two remaining digits.
•
If the password is corrected press SET key to confirm, otherwise
press SELECT key to leave the choice.
PASSWORD
0 1 2 3 4 5 6 7 8 9
SELECT
SET
PASSWORD
0 1 2 3 4 5 6 7 8 9
SELECT
SET
*
PASSWORD
0 1 2 3 4 5 6 7 8 9
SELECT
SET
* * *
MOD >
SGN 50dBuV
SELECT
SET
