32
EN
V
A
CUUM SEALER
D
2. Because these following operating instructions cover various
models, the characteristics of your appliance oven may differ
slightly from those described in this manual and not all warning
signs may be applicable. If you have any questions or concerns,
contact your nearest service center or manufacturer.
Instruction for use
To ensure safe operation:
• Before each use, verify the mechanical integrity of the device
and of all its components.
The device body, the oven compartments and all components
must not show cracks or tears.
The protective sheath and the plug of the power cord should not
be cracked or broken.
Upon the occurrence of the above, disconnect the plug from
the wall socket and take the unit to the dealer for the necessary
checks.
Before plugging the appliance, ensure that the line voltage
corresponds to that indicated on the rating plate (see page
54).
• The electrical safety of the device is ensured only if connected to
an efficient earthing system in accordance with current safety
standards.
To verify this important requirement you need the help of a
professionally qualified personnel.
The manufacturer can not be held responsible for damage caused
by lack of earthing.
• For your safety, it is recommended to supply
power through a differential switch (RCD) with
a tripping current not exceeding 30 mA.
• Do not obstruct the cooling during operation.
• Never immerse the appliance, the power cord
and plug in water or other liquids.
• Do not disconnect the electrical appliance by
pulling the power cord.
NO!!
OK!!
