![background image](http://html1.mh-extra.com/html/r-g-v/fd1025-new/fd1025-new_instruction-manual_3091079056.webp)
56
EN
MICR
O
W
A
VE O
VEN
In
COOKING WITH PRESET PROGRAM
mode:
a. Open the door.
b. Hold down the button
1
for 5 seconds, a beep confirms access to programming mode;
PROGRAM
appears on the display.
c. Press the number button that corresponds to the preset program to be changed; the
display will show the program number and the time currently set.
d. Use the number buttons to enter the desired cooking time.
e. Then press the button corresponding to the power level you want to assign to the program
being changed (“Hold 0%”, “Defrost 20%”, “Medium 50%” or “Med-Hi 70%”). The set power
level will appear on the right side of the display. If the same power selection button is
pressed two times, the default level PL10 will be set (no value will appear on the right side
of the display). If no power level is selected, the default level will be selected (PL10).
f. Press
Time Entry
,
STAGE-2
will appear on the display.
g. Select a second preset program and change it (optional).
h. If you want to set a third stage, press
Time Entry
;
STAGE-3
will appear on the display.
i. Select a third preset program and change it (optional).
l. Press
Start
to save the changes.
m. Close the door, the appliance will start for the total set time.
n. At the end of the set cooking time, the oven will enter
CYCLE END
mode;
DONE
will
appear on the display and a beep indicates that the cycle has ended.
o. Pressing the
Stop/Reset
button switches the oven to
PAUSE
mode.
For FD1025 NEW model:
After setting the power and time for the first stage, press
Time Entry
to set the second stage.
And the same step to set the third stage.
a. When setting the second or the third stage, press
Time Entry
,
S-2
or
S-3
displays.
b. Press
Start
button to start cooking.
Example: To set three stages as memory mode. The first stages
PL7
and time is 1 minute
and 25 seconds. The second stage is
PL5
and time is 5 minutes and 40 seconds. The
steps are the following:
a. Ready status, press
1
for 5 seconds, LED displays
ProG
.
b. Press number buttons
3
to save the program in
3
.
c. Press
1
,
2
,
5
to input the cooking time.
1:25
displays.
d. Press
Med-Hi 70%
,
PL7
displays. The first stage is finished.
e. Press
Time Entry
,
LED displays
S-2
.
f. Press
5
,
4
,
0
button,
5:40
displays.
g. Press
Medium 50%
,
PL5
displays. The second stage is finished.
h. Press
Start
to save the program.
Содержание FD1025 NEW
Страница 2: ......