52
EN
MICR
O
W
A
VE O
VEN
3. READY mode
a. In this mode, the oven is ready to start a manual or preset cooking cycle.
b. From
READY
mode, the oven can switch to almost all the other modes.
4. Door open
a. By opening the door, the oven enters door open mode.
b. The display is off in this condition. The fan and the lamp in the oven compartment are on.
c. If the option
OP: 60
is selected (see table “B”) and the oven was operating with a manual
or preset cooking cycle before opening the door, when the door is closed, the oven will
enter
PAUSE
mode.
If instead option
OP: 61
was selected, when closing the door, all information about the
current manual or preset program will be deleted.
5. PAUSE mode
a. This mode makes it possible for users to temporarily interrupt the cooking cycle to inspect
or mix the food being cooked.
b. In
MANUAL COOKING
or
COOKING WITH PRESET PROGRAM
mode, if the door is opened
or if the
Stop/Reset
button is pressed, the oven enters
PAUSE
mode.
c. During the pause, the remaining cooking time is shown on the display.
d. In this mode, pressing the
Stop/Reset
button returns the oven to
READY
mode.
e. The
PAUSE
mode ends automatically after the period of time set in option “4” has elapsed
(see table “B”).
f. In
PAUSE
mode, closing the door and pressing the Start button the oven will restart the
current program.
6. Simple cooking mode
a. With this procedure it is possible to set the desired cooking time and power level.
b. With the oven in
READY
mode, press the
Time Entry
button; “
00:00
” will appear on the
display.
c. Use the number buttons to enter the desired cooking time.
d. Select the desired power level by pressing one of the power selection buttons (“Hold
0%”, “Defrost 20%”, “Medium 50%” or “Med-Hi 70%”). The set power level will appear on
the right side of the display. If the same power selection button is pressed two times, the
default level PL10 will be set (no value will appear on the right side of the display).
e. If no power level is selected, the default level will be selected (PL10).
f. Press the
Start
button to start the oven.
g. Pressing the
Stop/Reset
button twice returns the oven to standby mode.
7. MANUAL COOKING mode
a. With the oven in
Simple cooking mode
press the
Start
button to start the oven.
b. The display will show the remaining cooking time. The fan and the lamp in the oven
compartment are on.
c. At the end of the set cooking time, the oven will enter
CYCLE END
mode;
DONE
will
appear on the display and a beep indicates that the cycle has ended.
d. Pressing the
Stop/Reset
button switches the oven to
PAUSE
mode.
Содержание FD1025 NEW
Страница 2: ......
