R.G.V. FD1025 NEW, Инструкция по эксплуатации

Страница: 51 / 72

51
EN
MICR
O
W
A
VE O
VEN
For FD1834 - FD2134 models:
• The appliance can be installed with a degree of overlap.
The maximum overlap height is two layers.
• To correctly fix the two appliances:
- Remove the two brackets “A” from the rear of the appliance (figure “2a”). Reposition
the screws in the holes.
- Remove the four screws “B” (figure “2a”).
- Position the brackets “C” as shown and tighten the four screws “B” (see figure “2b”).
Operation
1. Start
a. When the oven is powered electrically, the following appears on the display “ - - - - - - - ”.
b. Pressing the
Stop/Reset
button switches the oven to standby mode.
Note:
No button can be pressed in standby mode.
2. Standby mode
a. After a preset time of a few seconds passes without any button being pressed or the door
opened, the oven will switch to standby mode. The standby time can be changed with
option “4” (see table “A”).
b. In this mode, the display is off and there is no activity in the oven compartment.
c. Opening and closing the oven door exits the standby mode and switches to
READY
mode.
2a 2b
C A B
L