22
BA_BM_ML-120_EN_12-23.docx
8
Transport to the Installation Site
Only trained personnel may be used for the following work:
•
Transport the Mobile Lifter
•
Unloading the Mobile Lifter
•
Check delivery condition of the Mobile Lifter
8.1
Unloading the Lift Table
There is an increased risk of accidents when unloading and transporting the Mobile
Lifter! The Mobile Lifter can fall or tip over due to its weight!
Use only suitable and technically perfect lifting gear and suspension systems with an
adequate lifting capacity of 1000 kg.
Transport the Mobile Lifter on level, solid ground!
When placing the Mobile Lifter, pay attention to the possible danger of crushing in the
area of stationary objects around the Mobile Lifter!
Warning: Increased risk of injury and death! Never stand under the load when lifting
and putting it down! Instruct bystanders to leave the danger zone!
Warning: Increased risk of injury and death! Do not enter or climb onto the forklift
platform during transport!
Increased risk of crushing feet and toes! Wear steel-toed safety shoes!
8.1.1
Unloading from the Transport Vehicle using a Forklift Truck
•
With the forks set appropriately, drive centrally into the designated places on the freight pallet on the longi-
tudinal side of the Mobile Lifter and lift carefully. Fork length of the forklift truck at least 1.20 m!
•
Carefully lift the Mobile Lifter from the truck. The net weight of the Mobile Lifter is approx. 440 kg.
Danger to life when using a forklift truck! Keep a sufficient distance from the forklift
truck and watch its speed. Vehicles with combustion engines also produce toxic exhaust
gases. Wear a breathing mask if necessary.
8.1.2
Unloading from the Pallet using a Forklift Truck or Crane
Figure 4: Transpor eyelet
•
Remove all fasteners required for transport that secure the Mo-
bile Lifter to the pallet.
•
Directly in front of the control cabinet is the transport eyelet (
T
),
which are center of gravity balanced for lifting the Mobile Lifter
with a transport rope.
•
Feed a transport rope with sufficient load capacity for the approx.
440 kg Mobile Lifter through the transport eyelet (
T
) and attach
the other side to a special load hook for forklift trucks or directly
to a crane hook.
•
Now lift the Mobile Lifter gently from the pallet and place it with
the wheels on the floor.
Note:
If the transport eyelet proves to be an obstacle when opening the control cabinet door, it can be removed
in the meantime by loosening the nut on the underside.
T