12
BA_BM_ML-120_EN_12-23.docx
4
General
The operating manual must be read carefully and understood before using the Mobile
Lifter! If you have any questions, please contact the manufacturer.
The ergonomic Mobile Lifter ML-120 is used for panel handling of large-format panels in the upright panel storage.
With its high load capacity of 120 kg and six powerful vacuum pads, the Mobile Lifter enables you to lift and
transport panels up to a size of 2,100 x 3,200 mm without using your own physical strength. The Mobile Lifter is
designed for the following applications:
•
Turning large-format panels from vertical to horizontal
•
Feeding large-format panels to a processing machine
•
Transporting large-format panels from the warehouse to the machine hall
•
Feeding large-format panels to a panel saw
4.1
Application
•
The Mobile Lifter can be used for all work that corresponds to its intended use (see section
5).
•
The Mobile Lifter must not be used for work that does not correspond to its intended use (section
5.3).
4.2
Target Group and Previous Experience
This operating manual is intended for the operating and maintenance personnel of the Mobile Lifter. The operating
personnel is to be determined by the operator and must further meet the following requirements:
•
Basic technical and mechanical knowledge as well as knowledge of the associated technical terms
•
Reading and understanding these operating and maintenance instructions
In order to acquire the knowledge required to operate this Mobile Lifter, the operator must ensure the following
measures:
•
Product training for every operator (also possible external personnel)
•
Regular safety instruction
4.3
Requirements for the Operators
•
The operator is responsible for the safe use of the Mobile Lifter!
•
The Mobile Lifter may only be operated by trained personnel who have also read this manual.
•
Inspection, maintenance, cleaning and repair may only be performed by technical specialists
with product-specific training and mechanical and/or electrical training.
•
Specialists with product-specific training are to be commissioned and held responsible for
planning and checking the work.
•
The national protective regulations for employees must be observed
•
The legal minimum age must be observed.