Qwizdom DC100, Руководство пользователя

Страница: 29 / 30

Troubleshooting 28
© 2010 ... Qwizdom
7 Troubleshooting
Problem Possible Causes
No image
·
Power cord is not properly connected.
·
Cables are not properly connected.
·
Power switch is not turned on.
·
The built-in fuse is broken: change fuse.
·
Change the output resolution.
Image bending
·
Camera is not in right position: adjust the camera.
·
Distortion of LCD display: press the Auto button
to adjust.
Blurry, out of focus
·
The object is too close to the lens.
·
Focus is on the top point of zoom: press the Zoom
- button.
·
Autofocus is not on: press the Auto button again.
·
Fog on the lens in damp climate: this will
disappear gradually when the equipment warms
up.
If the problem still remains after checking the above, contact Technical Support .