2.4GHz Multi-Handset Cordless Phone System
Page 17
Consultation Call
You may consult with another intercom party while engaged in an external call.
1.
Place the external call on hold.
2.
Dial the internal (intercom) party.
3.
Confer with the internal caller. Press
End
or Intcm to terminate the intercom call.
4.
Resume the original call by pressing
Talk
or
Spkr
.
Call Pending
When engaged on an intercom call, the system alerts you that an external call is
being received.
1.
During an intercom call, an external call comes in (a tone will sound).
2.
Non-system (parallel) phones will ring.
3.
The handset display shows
ACCEPT
.
4. Press
Talk
or the
ACCEPT
soft key on the handset. On the base, press
Spkr
(it
will be flashing) to accept the call.
5.
Both parties of the intercom call are now connected to the outside line.
Join a Call
Picking up either a system handset or another household telephone will allow access
to the external line unless more than two system handsets (or handsets and
speakerphone) try to engage the line. If more than two system phones try to pickup
the call or if a system handset tries to pickup a call with two system handsets already
connected, an error tone will result.
Note: A parallel (non-system) household telephone can access the external line even
if two system handsets are on the line.
Calling Features
Use your handset to easily access
Qwest
calling
features. Qwest calling features are offered by
subscription or on a pay-per-use basis. For more
information about calling features offered in your
area, contact your Qwest representative.
1. Press
Talk
.
2.
The display screen will show
SERVICE
.
You have 5 seconds to select this
feature.
