Qvis APOIR-PTZ23, Руководство пользователя

Страница: 47 / 56

© Copyright Qvis® All documentation rights reserved.
39
IDLE FUNC
：
OFF
IDLE TIME
：
10MIN
IDLE ACTION
：
NONE
PARAMETER
：
NONE
SAVE
BACK
EXIT
10.4.4.7 Pattern
The Pattern function can store a PTZ operation
to the camera’s memory, which can include when you need
camera to focus zoom either in or out. From the start position, the camera begins auto movement repeatedly.
One pattern can support up to a maximum of 400 commands. Move the cursor to PATTERN and click the
confirm button.

PATTERN NO: This is to set the pattern number. Please click left/right key to configure.

P
ROGRAM START: This function will initiate pattern. An ‘OK’ icon pops up on the screen to prompt you that
system has begun memory pattern.

PROGRAM STOP
：
This is to set the pattern stop point. After camera has completed all movements, adjust
the cursor to PROGRAM STOP and then click the confirm button. You have now set one pattern. The
System pops up an
‘OK’ icon to prompt you that system has memorised one pattern.

RUN
：
This is to activate a pattern. Input pattern number, move the cursor to RUN and click confirm button,
system begins running pattern.

STOP: This is to stop current pattern. Input pattern number, move the cursor to STOP and click confirm
button. System stops current pattern.

BACK: Go back to previous menu.

EXIT: Log out system menu.
Note:

The dwell time between two orders should be less than one minute, otherwise system will set to default
value as one minute.

After click PROGRAM STOP, do not click CALL button before icon
“
●”
disappears completely.

Any manual operation during the pattern procedure will terminate current dome pattern operation.
10.4.4.8 Idle Function
PATTERN NO
：
001
PROGRAM START
PROGRAM STOP
RUN
STOP
BACK EXIT