Qvis APOIR-PTZ23, Руководство пользователя

Страница: 36 / 56

© Copyright Qvis® All documentation rights reserved.
28
ADDR
：
001-H
BAUD RATE
：
9600
PARITY
：
NONE
SOFTWARE
：
v1.04.3
BACK EXIT

BACK: Go back to the previous menu.

EXIT: Log out of the system menu.
10.4.1.1 Initialisation information
Move the cursor to INITIAL INFORMATION and then click the confirm button, you will see the above interface.
Here you can view the dome
’s basic information.
10.4.1.2 Address Information
Move the cursor to SITE INFORMATION and then click confirm button.

ADDR TYPE: There are two options: soft and hard. Please use the left/right button on the keyboard or in the
PTZ camera terminal menu to set. Please click the OK button to confirm

ADDR-HARD: It is an address you can set in the dial switch. You cannot modify it through the software.

ADDR-SOFT: You can set address via software. It is to say, you can use menu to modify dome address.
The value ranges from 1 to 255.

BACK: Go back to the previous menu.

EXIT: Log out system menu.
10.4.1.3 System Time Setting

Move the cursor to SYSTEM TIME SETING and then click confirm button, you can go to the third submenu.
Please use the left/right button on the keyboard or in the PTZ camera terminal menu to set. After completing
the setup, please click the confirm button to save current setup. After the PTZ camera menu displays OK,
you will see that the setup is now valid.
ADDR TYPE
：
HARD
ADDR-HARD
：
001
ADDR-SOFT
：
001
BACK EXIT
YEAR : 2012
MONTH : 07
DATE : 20
WEEK : FRIDAY
HOUR : 013
MINU
：
: 052
SAVE
BACK
EXIT