QUPIT 159-01, Руководство по установке

Страница: 13 / 16

13 | Boiler gateway “Adam”
EN
Connect to the boiler
Installation diagram Adam with thermostat
Disconnect the thermostat wire
between the boiler and the
thermostat and replace it with the
extra installation cable for the boiler.
Connect the wires running to the
boiler to the boiler gateway at the
flame icon.
Connect the wires running to the
thermostat to the boiler gateway at
the thermostat icon. You must use the
existing wires to do this.
Determine the position of the boiler
gateway by the boiler and fix the wall
plate of the boiler gateway.
Click the boiler gateway onto the wall
plate.
Plug in the boiler again. Plug the boiler
gateway into the power outlet and wait
until the boiler gateway has started up.
Installation diagram Adam with smart
thermostat
Consult the manual of the boiler for
more information about the connector
of the boiler.
Some smart thermostats have a
gateway that is connected to the boiler.
For these installations place the boiler
gateway between the gateway of the
thermostat and the boiler.
Unplug the boiler and the boiler
gateway from the electrical network.