QUPIT 159-01, Руководство по установке

Страница: 11 / 16

11 | Boiler gateway “Adam”
EN
Short ID
Network name
More information The installation
The installation can be described in 2
steps:
1.
Connect the boiler gateway to the
(WiFi) network.
2. Connect the boiler gateway to the
wires between the boiler and the
thermostat.
Connect to the network
Do this close the boiler. This way you
ensure the WiFi signal is strong
enough.
Connect the adapter cable to the
adapter and the boiler gateway and
plug the adapter into the wall socket.
Wait until the boiler gateway has
booted up: the upper light and the
light in the middle of the boiler
gateway are blinking slowly.
WiFi via WPS?
WiFi via WPS is only supported via a
special WPS button on the router.
Press the black button on the boiler
gateway for 2 seconds.
Wait until the upper light is blinking
quickly and regularly.
Enable WPS on the WiFi router to
connect to WiFi.
In the package
In the package of the boiler gateway you
will find:
1. Qupit boiler gateway
2. Wall plate
3. Installation cable to connect to the
boiler
4. USB adapter
5. Adapter cable
6. Installation instruction
7. Installation card (in the back of the
installation instruction)
More information about the Qupit boiler
gateway can be found on our website:
www.getqupit.com/boiler-gateway .