1 Switch off the CUBE
Make sure that the ‘COLD’ switch at the
back of the CUBE is set to ‘0’. Do not
remove the power cable.
2 Empty the CUBE
Drain all sparkling water from the tap
and turn it off when only CO₂ gas comes
out. You may need to dispense sparkling
water twice before the CUBE is completely
drained.
3 Shut off the water
Shut off the water supply to the CUBE
using the blue stop valve. Check that
the system has been depressurised by
dispensing filtered water from the tap. No
water should come out. Unscrew the CO₂
cylinder from the CO₂ pressure reducing
valve. A small quantity of CO₂ gas may
escape.
4 Remove the CUBE
Remove the blue connector from the blue
port at the back of the CUBE and remove
the plug from the power socket. Remove
the hoses by pressing down on the grey
ring on the push fit connections whilst
pulling the hoses out. The CUBE tank must
always be transported in appropriate
packaging.
3
2
4
Remove the CUBE
• The CUBE must always be drained of water before servicing.
E
1
