1
3
Prepare the CUBE for use
• Depending on the temperature of the cold mains water supply, it takes about 40 minutes for
the water in the CUBE’s tank to cool down completely. The first time after installation of the
CUBE, it will take about 60 minutes.
1 Switch on the water
Switch on the mains water supply. Open
the CUBE stop valve by turning the blue
handle. Check for leaks.
2 Connect the power supply
Make sure that the ‘COLD’ switch on the
rear of the CUBE is set to ‘0’. Connect
the power cable provided to the CUBE.
Connect both the CUBE and the Quooker
tank to mains power sockets and switch
on the sockets. Switch on the Quooker
tank by pressing the ‘Q’ button on the top
of the tank.
3 Flush the CUBE – filtered water
Flush the CUBE’s filtered water through
twice for one minute each time (the
tap switches off automatically after one
minute). To dispense filtered water, hold
the textured ring down until the tap lights
up blue, then turn it anti-clockwise. Initially,
black water will flow out. This is from the
built-in carbon filter and is completely
harmless.
4. Switch on the CUBE
Set the ‘COLD’ switch on the rear of the
CUBE to ‘1’. The CUBE will now start to cool
the water and the pump will be activated.
D
2
4
