Quinton TM55, Руководство пользователя

Страница: 39 / 46

Cardiac Stress Treadmills User Guide Receiving and Installation C-5
5. Check the circuit breaker switch on the treadmill hood to
be sure it is set to ON.
6. Test the treadmill as described below by using the
controls on the monitoring system.
Testing the Treadmill
Warning! DO NOT permit anyone to stand on the treadmill
when it is started.
1. Connect the treadmill power cord to the correct power
outlet. Turn on treadmill power.
2. Start the walking belt from the monitoring system: the
treadmill starts running immediately at low speed.
3. Set the treadmill to minimum speed and zero grade and
confirm that the treadmill meets these values.
4. Set the treadmill to maximum speed and confirm that the
treadmill meets that value.
5. Set the treadmill to maximum grade and confirm that the
treadmill meets that value.
6. Let the treadmill run for at least 15 minutes.
Emergency Stop
(optional)
Circuit Breaker
Switch
Monitoring System
Interface Cable
Connector
Switch Connector