D-4 Controls, Displays, Indicators
MedTrack Rehabilitation Treadmills User Guide
Limited Access Control
The limited-access control restricts access to the treadmill
controls. To operate the treadmill when the limited-access
control is activated, you must place a magnetic key, supplied
with the treadmill, over the magnet logo on the front of the
controller.
To activate the control, place the magnetic key over the logo.
To deactivate the control:
1. Remove the magnet. Be sure the controller power is off.
2. Press and hold the
+
,
-
, and
Power
keys until the 8s on the
display go off, then release the keys.
Time Limit Control
The time limit control lets you set a maximum time for
treadmill use, ranging from 7 to 96 minutes. When the time
limit is activated, the treadmill runs for the time entered by
the user, then automatically slows to minimum speed. The
speed and grade controls remain inoperative until you press
the
Stop Belt
key.
To limit the exercise time, use the following procedure:
1. Simultaneously press and release
Stop Belt
,
Cool Down
, and
Select
.
2. Use the
+
or
-
keys to increase or decrease the time to the
desired limit. Use
Clear
to set the limit automatically to 30
minutes.
3. Press
Select
.
To deactivate the time limit control:
1. Simultaneously press and release
Stop Belt
,
Cool Down
, and
Select
.
2. Press
+
to set the time to 96.
3. Press
Select.
