2-8 Operating the Treadmill
MedTrack Rehabilitation Treadmills User Guide
6. Press
Start Belt
. The belt accelerates gradually to
minimum speed and remains at minimum until you press
Faster
.
7. Have the patient step onto the treadmill per the
guidelines.
8. Press
Faster
or
Slower
to increase or decrease the walking
belt speed. The display shows the target speed as it
adjusts to the change. You can change the speed at any
time during the exercise.
9. Press
Up
or
Down
to increase or decrease the grade. The
display shows the target grade as it adjusts to the change.
You can change the grade at any time during the exercise.
10. Press
Select
to choose a particular exercise display (Time,
Distance, Pace, Calories, Caloric Rate, METS, Scan).
The displays change sequentially each time you press
Select
. To rotate continuously through all displays, select
Scan
. Each display will appear for three seconds per
cycle.
11. At the end of the exercise, press
Cool Down
to enter cool-
down mode, or press
Stop Belt
to stop the walking belt.
♦
It is not necessary to use
Cool Down
mode before pressing
Stop Belt
.
12. Press
Clear
to erase the accumulated time and distance
and reset the controller displays to default.
13. When the belt stops, have the patient grasp the handrail
and step off the treadmill.
14. Press
Power
to turn off the controller.
